型号 | XD-500 | 打厚度 | 35(mm) | | 现代牌 | 打方式 | 手动 | 打个数 | 3 | 包装方式 | 纸箱泡沫包装 |
XD-500三重型打机使用说明书 1.本机大打厚度35mm,距83mm,径5mm,亦可配4、6、7、8mm冲(需订购) 2.依据纸张大小,调整前后左右靠山,设定正确打位置 3.经常检查黑冲垫,若有明显凹痕,请用木枇按顺时或逆时推动,若无新位置可打,必须更换 4.冲亦属耗材,多次使用需适时更换 5.更换冲按图示,用木枇逆向拧开M5沉头螺丝,冲即脱开,换上新冲,拧紧螺丝 6.经常清理纸屑盒 Operating Instructions of XD-500Puncher 1. Maximum punching thickness: 35mm, distance between holes: 83mm,hole diameter: 5mm (alternative: 4mm, 6mm, 7mm, 8mm) 2. Adjust and fix the paper according to its size, to get accurate ition of the holes. 3. Check the black padfrequently, turn it clockwise or counter-clockwise if necessary, and change it when it is broken. 4. Punching knife should also be changed when necessary. 5. When change pouching knife, please unscrew M5, change the knife, and then tighten the screw M5 again. 6. Please clear the wastepaper box frequently. 技术参数: 距: 83mm 径: 5mm(4、6、7、8任选)打能力:36mm(500张)
|