您好, 欢迎来到1024商务网   [请登录]  [免费注册]  忘记密码
首页 新闻资讯 产品大全 企业 求购 品牌
企业 动态 用户在搜:盖板模具 礼堂椅 常熟车床 二手压路机 电动执行器 武汉复合板 光固化树脂 过热蒸汽发生器 义乌饰品 吊篮,懒人椅 洛阳压路机 配电网一体化测控终端 有线电视可变均衡器 
当前位置:首页 > 产品大全 > 仪器仪表 > 专用仪器仪表 > 南澳电气生产NAKFR变压器空载负载特性测试仪 更新时间:2019-03-01

南澳电气生产NAKFR变压器空载负载特性测试仪

南澳电气生产NAKFR变压器空载负载特性测试仪
供应商 南澳电气(武汉)有限公司 商 铺
认证普通会员
报价1
型号NAKFR
品牌南澳电气
产能999999/月
起订1
交货期现货
所在地武汉东湖高新技术开发区关山大道60号光谷科技产业园8栋
联系电话027-87677658
手机号15327206266
联系人刘永强 联系时请一定说明在1024商务网看到
在线咨询点击这里给我发消息 <<纠正以上所有信息>>

产品详情

NAKFR Tranormer unloaded &loaded characteristic tester  

NAKFR全自动变压器空载负载特性测试仪

产品简介

NAKFR变压器空载负载特性测试仪是于变压器空载损耗、短路损耗、零序阻抗、短路阻抗的仪器,空载损耗和短路损耗是发电机、电动机、变压器试验的重要项目;根据GB1094.5-85IEC14/268CD规定,短路阻抗的变化是判断变压器绕组有无变形的判据。该仪器电路设计精巧,思路独特,使得其性能越,功能强大,体积小,重轻,现场使用极其方便。该仪器内部采用的多A/D同步交流采样及数字处理技术,成功的解决了低功率因数测及多路在市电条件下同步测和计算的难题,和乘法器功率测技术相比具有显著的越性,NAKFR变压器空载负载特性测试仪操作简单方便,数据准确可靠,可完全取代传统仪表的测试方法,可显示并记录用户关心的所有测数据,可作为现场高精度交流指示仪表使用。使用该仪器可大大提高工作效率,减轻劳动强度。

产品别名

变压器空负载测试仪、变压器空载及负载特性测试仪、变压器损耗测试仪、变压器空载负载测试仪

产品特性

1、可测各种类型的变压器的空载电流、空载损耗、阻抗电压、短路损耗。

2、电压回路宽限:大测电压750V,不用切换档位即可保测精度。不会因电压档位选错而对仪器本身有所损坏。

3、大屏幕、高亮度的液晶显示,全汉字菜单及操作提示实现友好的人机对话,操作更简便。

4、用户可将测试数据实时打印出来。

5、采用数字同步采样技术,准确测三相用电设备的电压、电流、功率、等参数的真有效值,测精度为0.2级。

6NAKFR变压器空载负载特性测试仪可取代九块同等级的指仪表,是传统电测试仪表的理想换代产品。

产品参数

1、输入特性:

电压测范围:0~750V  宽限。

电流测范围:0~100A  内部自动切换程。

2、准确度:  

电压、电流:±0.2%

功率:±0.2%COSΦ>0.1),±0.5%0.02 CosΦ<0.1

3、工作温度:-10~ +40

4、工作电源:交流160V~265V

5、绝缘:

电压、电流输入端对机壳的绝缘电阻100MΩ。工作电源输入端对外壳之间承受工频2KV(有效值),历时1分钟实验。

6、体积:45cm×30cm×21cm

7、重:3Kg

 

Product introduction

NAKFR tranormer unloaded &loaded characteristic tester is dedicated to the tranormer unload loss,short-circuit loss , zero sequence impedance,short-circuit impedance of the instrument,unload loss and short-circuit losses are generators,motors,tranormers trials important items; according to GB1094.5-85 and IEC14/268CD regulations,changes in the amount of short-circuit impedance tranormer winding is to determine whether the deformation of the sole instrument circuit design is exquisite,unique ideas,making its performance is superior,powerful,small size,light weight,extremely easy to use internal instrument uses advanced multi-A / D Synchronous AC sampling and digital signal processing technology,the succesul solution of the low power factor measurement and multi -channel signal in the city,under the conditions of simultaneous measurement and calculation of the problem, and the multiplier power measurement technology has significant advantages over,NAKFR tranormer no-load load Tester easy operation , accurate and reliable data that can completely replace the traditional instrumentation of the test method,the user can display and record all measurement data concerned,can be used as on-site precision AC indicating instrument used. Use instrument can greatly improve efficiency, reduce labor intensity.

Also called name

Tranormer unloaded &loaded characteristic tester, Tranormer unloaded &loaded characteristic test device, tranormer loss tester, tranormer unloaded &loaded tester

The Characteristics of the products

1,Measure the tranormer load loss, load current, load loss, impedance voltage, zero sequence impedance, short-circuit impedance, voltage RMS, average voltage, current, power, power factor, frequency and other parameters.

2,All the data are in the same cycle synchronous measurement, ensure that the mains accurate measurement results under the conditions of rationality.

3,With automatic waveform distortion correction, voltage correction, current correction, temperature correction, without any manual calculations.

4,The instrument allows the measuring range can be measured directly, can be an external primary voltage tranormer and current tranormer if beyond the measuring range..

5,Can be locked for transcribing data while storing and printing all measurements, the instrument does not power down memory built, long-term measurement data is saved and ready for inspection.

6,With large blue LCD screen, full English menu and operation prompt, easy and intuitive.

7,Power-fail protective calendar and clock function.

The parameters of the products

1,Basic measurement accuracy: voltage, current: 0.2% ± 3 words

2,Power: 0.5 (cosφ> 0.1), 1.0 grade (0.01 3, the voltage measuring range: AC0 ~ 800V

4,The current measurement range: AC0 ~ 80A

5,The frequency range: 45 ~ 60Hz

6,Working temperature: -10 ~ 40

7,Humidity: 10% ~ 85%

8,Storage temperature: -20 ~ 50

9,Dimension : 370mm × 260mm × 160mm

10,Weight: 7kg (not including test line)

 

Power supply: AC110V/115V/120V/127V/220V/230V/240V optional

Input frequency: 50Hz/60Hz optional

Note: The users can the corresponding power which based on their local supply voltage and frequency, and we will confirm it before the delivery (or inform us that the goods will be used in which ry advance)

上一条产品:单摇床垫 双摇床垫 带便口 医院床垫 棕垫 病床棕垫    下一条产品:医疗ABS床头柜 床头柜 病床 医院床头柜
该会员还发布了以下产品:(查看更多)
南澳电气生产NATXC全自动变压器消磁机
南澳电气生产NATXC全自动变压器消
南澳电气生产NAHY型系列人工气候试验室淋雨环境试验室仿真模拟设备系统装置
南澳电气生产NAHY型系列人工气候
南澳电气武汉公司生产NADCC大电流发生器导线
南澳电气武汉公司生产NADCC大电流
南澳电气武汉公司生产NA8815智能放电监测仪
南澳电气武汉公司生产NA8815智能
关于南澳电气(武汉)有限公司商铺首页 | 更多产品 | 联系方式 | 黄页介绍
主营:交直流分压器,峰值电压表,超声局放定位系统,局部放电检测仪,试验变压器,互感器校验仪
南澳电气(武汉)有限公司(以下称“南澳电气”),是国电网武汉高压研究所改制后成立的高新技术企,也是早期国企改革后成立早的型重点生产单位,公司是集研发、设计和制造高电压输变电检测设备的高新骨干企,主要从事电力检测设备、高电压试验研究、电力在线监测系统的研发。经过公司全体员工们孜孜不倦多年的努力,目前公司已成为集售后服...
小提示:
1、以上信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责,1024商务网对此不承担任何责任。提醒大家小心警惕,慎防网上欺诈!
2、【南澳电气生产NAKFR变压器空载负载特性测试仪】 并非你需要的产品?你也可以看看以下关于专用仪器仪表的其他产品或者直接发布求购信息!
相关文章
·南澳电气(武汉)有限公司
相关搜索: 变压器空载负载损耗及   变压器空载及负载特性   变压器空载负载特性测   变压器的空载特性:   变压器电气特性   油浸式变压器空载 负载损耗表   空载负载测试仪   智能型变压器空载负载   变压器空载负载测试仪   变压器空载负载及容量   变压器容量及空载负载   变压器空载短路测试仪   变压器电气特性全自动   空负载特性测试仪   变压器空负载测试仪   电机测试仪 测转速空载负载  
相关产品分类: 计量标准器具  
相关公司分类:
 
关于我们 - 广告服务 - 使用手册 - 联系我们 - 法律声明 - 友情链接 - 删除或修改信息 - 网站地图
本站信息由会员自主添加,如涉及隐私等,网站不承担任何责任!如发现侵权违规等问题请发邮件至XXX#qq.com(#用@代替)或在线留言联系删除。
版权所有 1024商务网 浙ICP备12020213号-1 客服QQ: 微信号: