广州音科机电设备有限公司销售奥地利Fronius焊机福尼斯焊机,Fronius福尼斯TPS/i智能平台焊机系统,Fronius福尼斯TPS/CMT焊机系统,Fronius福尼斯TPS/TS系列焊机,Fronius福尼斯氩弧焊机,Fronius福尼斯手工焊机。
MagicWave 1700/2200/2600/3000/4000/5000
TransTig 1600/1700/2200/2600/3000/4000/5000
福尼斯焊机Fronius焊机TT5000福尼斯氩弧焊机TransTig5000奥地利进口
MOTOR
PLATE & FEED ROLLS 马达盘和送丝轮 /Motor
plate made of Al-Cast铸铝结构的马达盘 /Self-opening
swing lever 可直接打开送丝轮 /A
pressure lever to adjust 送丝压力可调 /Feed
rolls with color marking for wire diameter 不同颜色针对不同送丝轮 /Inching
without opening the pressure lever 不同打开送丝轮,可电动送丝 /U-groove
with four points of support 4点接触的
u型槽 送丝轮 /Heavy
Duty – HRC 60 – fully hardened 硬度为HRC
60 的送丝轮 /Ball
bearings 球轴承 OPTIONS 可选项 /Water
Cooling 水冷 /Potentiometer
Front 参数调整前置面板 /Gas
test – Inching 测气,点动送丝按钮 /Euro,
Tweco, F++ 其它接口 FSC
ECTION FSC接口 11
CPC Contacts 11个信号接口
Air 压缩空气Gas保护气体 SpeedNet (optional)
高速通讯(选配) /Ignition power fitted to wire end
condition; every time a good ignition (cold or hot wire) /根据焊接收弧的情况来决定起弧的条件;保证每的起弧(无论是在冷丝还是热丝条件下) TPS/i PROVEMENT – WELD START 改进焊接起弧/How it works ... 工作原理 /Power to the wire stickout at weld end
and pause time is recorded 焊接结束时,干伸长的能以及焊接结束后的 停留时间,都会被记录下来 /Creep speed is adjusted to the
recorded values
起弧缓送丝速度会根据记录值变化 /Ignition power is adjusted to the
recorded values /起弧的能会根据记录值变化 /Practical use … 应用场合 /… fast process stabilization 例如:快速焊接的场合 很多点焊定位点 /Depending on process and range, wire
feed speed is a new control variable in process regulation loop 根据不同的焊接模式和范围,送丝速度在一定的区间内是可变化的。 TPS/i IMPROVEMENT – WIRE REGULATION How it works ... 工作原理 /Wire feed speed changes 送丝速度可变 /Dependent on
the torch distance to workpiece 与焊枪到工件的距离无关 /Change range is adjustable by user or
down to zero (0-10m/min) 可变值:0—10m/min可调 /Practical use …应用场合 /… Penetration stabilization 恒熔深 例如(摆焊)/… Faster arc length regulation 更快的电弧长度调 整速度 /VIDEO etration_stabilize_pict”
|