河北宏旭模具生产流水槽钢模具、水泥流水槽模具、急流槽钢模具、卵型槽模具，U型槽模具，缝隙式排水槽模具，防浪块模具，隔离带模具，安全岛模具，路沿石钢模具，拱形骨架护坡钢模板，扭王字块模具，挡土墙模具，四脚空心方块模具，防撞墙模具，箱体式护坡模具，生态挡墙砌块模具，植草式护坡模具，L型挡土墙模具，框格护坡模具，排水沟钢模具、泄水槽模具，农田灌溉U型槽模具，遮板模具，边沟模具，水沟模具等。我厂所有钢模具采用3-8mm钢板焊接而成，每个型面都可打开，使用方便、出模快，成品效果好，我厂钢模具在使用过程中，首先在模具里面刷上机油和脱模剂，有利于脱模具，然后将搅拌好的水泥或混凝土倒入模具中，经振动平台振动成形，或振动棒振捣，等水泥初期凝固之后便可脱模，约24小时左右。
我厂是一家集模具研发、设计、生产、销售为一体的企，建厂20多年，打造各种预制件塑料模具、钢模具，销往各地，有丰富的设计经验和生产技术，保定京伟是您不二的选择，值得信赖！
Specializing in the production of water channel steel mold, cement water channel mold, rapids channel steel mold, oval groove mold, U-groove mold, slot drainage groove mold, wave block mold, isolation belt mold, safety island mold, road edge stone steel mold, arch skeleton slope protection steel template, twist Wang block mold, retaining wall mold, four foot hollow block mold, anti-collision wall mold, box slope protection mold , ecological retaining wall block mold, grass planting slope protection mold, L-shaped retaining wall mold, frame slope protection mold, drainage ditch steel mold, drainage ditch mold, farmland irrigation U-shaped groove mold, shutter mold, side ditch mold, ditch mold, etc. All steel molds in our factory are welded with 3-8mm steel plates. Each mold surface can be opened, which is easy to use, quick to exit, and the finished product has a good effect. In the process of using the steel mold in our factory, first brush oil and release agent in the mold, which is conducive to mold removal, then pour the mixed water mud or concrete into the mold, and vibrate the mold through the vibration platform, or vibrate the vibrator, etc It can be demoulded after initial solidification, about 24 hours.
|