“金信牌”半斜面电脑提花织带机，选配自主开发设计（国家利）JXGS电脑控制提花龙头，龙头采用法国STAUBALI电磁阀，机械采用连杆复动式工作，避免因皮带松动或皮带经常断造成的漏针现象。用途：用于生产图案，字符，文字等经提花效果的弹性或非弹性窄幅织物以及装饰物。花型创建由384根和8片综框控制。可生产各式弹性带与非弹性带类，例如胸围带，衣库松紧带，缎带，拉链带，鞋带等，可用于成衣，帽子，发饰，礼品，医疗用品，皮带，手套，雨衣，鞋类，照相机，手表，皮包等提花织带。
Application :it is applied to producing the patterns , characters and bytes for the jacquard elastic and non-elastic narrow-breadth knitting fabric and ornaments . The patterns scopes cover from 384ropes to 12 pieces in iron frame control. characters and bytes for the jacquard elastic and non-elastic narrow-breadth knitting fabric and ornaments such as chest ribbons, elastic ribbons, curtain ribbons, viscose gripper ribbons, gripper chains, safety ribbons and laces that are widely applied to ready garments, headwear, hair ornaments , ,gifs, medical products, belts, gloves, raincoats, shoes, cameras, watches , leather bags , etc.
主要特点：高速设计，可自由选择设定设备的车速，操作简便，稳定性高，安全。
Characters :It is mainly characterized by high speed , free options of setting speed , ease of operation , table performance and safety.
显著特点：电脑控制复动提花龙头jxnfs龙头，使用上开口选针系统，可配标准，加大及双针织造，高中低提花开口。
1.龙头安装在中心支架上，装卸方便，设计简单，操作容易。
2.微处理控制，配内置式可编程和数据系统(金信电脑控制系统)悬挂式控制。节省空间和高速的数据传输，使的稳定性更高。
3.根据的微电子技术设计、内置性软件程序，用于从机器上储存起上调出设定的数据，例如：定单数，预设定数，生产总等自动停机、效率和机率，若遇停电系统将会将数据资料自动备份。
4.花样变化方便，可由键盘直接输入，读取预先编写花样拷贝在U盘上高速读取数据、节省生产费用。
5.花样设计和编程创建，采用金信公司配套的(jinxin CAD)写花系统，生产数据记录和控制采用(金信电脑提花控制系统)。
special features:computer-control double-lift pattern cock jxnfs, upper opening needle-chosen system, standard, enlarged, double-needle or high, middle, low pattern operning layout are optional.
jacquard unit (also called embroidering unit) is installed on the central support, featuring free dismantling ,simple design and ease of operation.
treatment control, built-in programmable data system (Jinxin computer control system), hanging control, space saved, high-speed date transmission, higher stability.
employs the advanced micro electronic technology in design . inserted permanent soft programmable and data system, with which the user can get the data like number of orders . pre-set quantity, total production capacity ,auto stop, efficiency and rate from the principle computer,.The system can automatically copy and store the datain case it encounters shortage of electricity .
pattern change-over, direct input by keyboard, readpre-written pattern, and copy it in U-disk, more production
design of patterns and program employs the advanced INXING CAD .And the pattern-writing system , production data record and control employs the advanced JINXIN computer jacquard control system.
特殊配备
TX:弹性织物双纬系统，织造橡胶丝，可自动送胶。
JNF-T:双钩针构造。
Special equipment:
TX: elastic fabric double weft system, knitting
rubber thread , auto rubber thread feeder
JNF-T: double crocket hook
主要技术参数:
Main technical parameters:
| 机器型号 | Machine model | 8/35 | 6/50 | 4/66 |
| 条带数 | Number of ribbons | 8 | 6 | 4 |
| 大钢筘 | Max steel gripper | 35 | 50 | 65 |
| 大带宽 | Max width | 35 | 50 | 65 |
| 综框数 | number of iron frame | 8 | 8 | 8 |
| 循环 | circulation | 1:8/16-32 | 1:8/16-32 | 1:8/16-32 |
| 针数 | number of needles | 128-192 | 192-320 | 192-640 |
| 机台宽度 | width of worktable | 980mm | 980mm | 980mm |
| 大机器高度 | max height of machine | 2600mm | 2600mm | 2600mm |
| 小机器高度 | min height of installation space | 3000mm | 3000mm | 3000mm |
| 重 | weight | 890kg | 890kg | 890kg |