海韵牌BT-2000型无机铝盐防水剂（液.小桶）

海韵牌BT-2000型无机铝盐防水剂（液体）

Chaton brand BT - 2000 type inorganic aluminum salt water-proofing agent (liquid)

执行标准：JC474-2003

Execution standard: JC474-2003

 一、产品简介

A, product profile

 　　海韵牌BT-2000型无机铝盐防水剂是砂浆防水外加剂，以无机铝盐为主要原料，加人多种化工原料化合而成的溶液及粉剂，技术性能建筑部颁发的《JC474-99》防水剂标准，国家饮用水水卫生标准《GB5749-85》。掺入砂浆混凝土中形成坚固致密的憎水物，充填、堵塞混凝土、砂浆在硬化过程中形成的毛细隙和水通道，具有极强的憎水性和潮气的排斥性，从而赋予混凝土结构物与水泥制品异的防水性能。具有防水、减水、抗裂、抗拉伸、抗折弯、早强、抗渗、防漏、防潮、耐碱等点，门用于建筑结构表面层的钢性性防水形成坚固致密的憎水物，充填、堵塞混凝土、砂浆在硬化过程中形成的毛细隙和水通道，具有极强的憎水性和潮气的排斥性，从而赋予混凝土结构物与水泥制品异的防水性能。

　　Chaton brand BT - 2000 type inorganic aluminum salt water-proofing agent is waterproof mortar special additive, based on inorganic aluminum salt as main raw materials, with a variety of chemical raw materials combined into a solution and powder, technical performance accords with ministry of construction issue "JC474-99" water-proofing agent, accord with national standard of drinking water hygiene standards "gb5749-85". Mixed mortar concrete form a firm dense detest water substances, filling, jams concrete, mortar in sclerotic process form the wool stoma gap and the water channel, with strong hydrophobic and moisture tissue rejection, thus giving concrete structures and cement products excellent waterproofing performance. Watertightness, decrease water, crack resistance and tensile, resistance to bend, early strength, anti-permeability, leakproof, moistureproof, acid and alkali resistant etc, and specially for building structural surface layer of rigidity lasting water-proof form a firm dense detest water substances, filling, jams concrete, mortar in sclerotic process form the wool stoma gap and the water channel, with strong hydrophobic and moisture tissue rejection, thus giving concrete structures and cement products excellent waterproofing performance.

 二、用途：

Second, USES:

1．用于工与民用建筑的屋面、地下室、隧道、矿井、人防工程、地下人行道、地下商场、地下停车场、游泳场、水塔、给排水池、水泵等有防水抗渗要求的混凝土工程。

1. Used for industrial and civil architecture roofing, basement, tunnel, mine, civil air defence works, underground sidewalks, underground mall, underground parking lot, playground, towers, drainage pool, water pumping station, etc have waterproof impermeable concrete engineering requirements.

2．建造水池、游泳池、水塔、贮罐，大型容器、粮仓，山洞内贮存库。

2. Build pool, pool, towers, tank, large containers, granaries, the caves in stores.

3．建筑工程：地面，内、外墙面，卫生间等部位防水。

3. Architectural engineering: the ground, metope, toilet, within the areas such as waterproof.

 三、特点：

Third, features:

区别于其它柔性、钢性防水材料（特别是粉状）具有以下特点：

Different from other flexible, rigid waterproofing material (especially powder) has the following features:

1．该产品为暗红液体，无污染、无腐蚀、不燃、对人身体无害的环保防水剂。

1. The product as dark red liquid, no pollution, no corrosion, non-flammable, to the human body harmless environmental water-proofing agent.

2．防水性能好，实测抗渗标号≥ P15以上，不降低混凝土强度，抗老化，防水寿命长。

2. Waterproof properties is good, the measured anti-permeability label ≥ P15 above, cant reduce the strength of concrete, anti-aging, waterproof and long service life.

3．减水率5～10%

3) decrease water rate5～10% 

4．施工简便，易操作，可节省大材料、人工费和费。

4. Construction simple, easy to operate and saves materials, Labour and maintenance cost.

5．工程造价低，砂浆抹面3～4元/㎡。

5. Engineering cost low, mortar precausions 3～4 yuan /㎡.

6．耐热（120℃）、耐寒与水泥寿命同等。

6. Heat (120℃), cold and cement life equally.

四、执行标准：

Four, executive standard:

JC474 — 1999《砂浆、混凝土防水剂》、GBJ 50119 — 2003《混凝土外加剂应用技术规范》、GB8077 — 2000《混凝土外加剂匀性试验方法》。

JC474-1999 "mortar and concrete water-proofing agent", GBJ 50119-2003 "concrete admixtures application technology norms," and GB8077-2000 the concrete admixtures evenly qualitative test method ".

五、技术指标：

Five, the technical index:

检测类别	检测项目			计单位	标准及企规定 （合格品）	检验结果
	序号	名称
砂浆性能	1	安定性		/	合格	合格
	2	凝结时间	初凝	min	≥ 45	190
			终凝	h	≤ 10	6
	3	抗压强度比	7d	%	≥ 85	103
			28d		≥ 80	82
	4	透水压力比		%	≥ 200	300
	5	48h吸水比		%	≤ 75	70
	6	28h收缩率比		%	≤ 135	120
混凝土性能	1	净浆安定性		/	合格	合格
	2	凝结时间差（初凝）		min	≥－90	+108
	3	泌水率比		%	≤ 70	69
	4	抗压强度比	3d	%	≥ 90	94
			7d		≥ 100	102
			28d		≥ 90	92
	5	渗透高度比		%	≤ 40	31
	6	48h吸水比		%	≤ 75	72
	7	28h收缩率比		%	≤ 135	112
	8	对钢筋的锈蚀作用		/	应说明对钢筋有无锈蚀作用	无锈蚀作用
匀性	1	密度		g/㎝3	0.9～0.92	0.909
	2	氯离子含		%	0.06～0.1	0.07

六、用与用法：

Six, dosage and usage:

1、用：

1, dosage:

（1）混凝土浇注工程防水剂掺为C × 3%，即一般9㎏/m 3。

(1) concrete pouring engineering water-proofing agent admixture for C × 3%, . general 9㎏/ m 3.

（2）水泥砂浆抹面工程防水剂掺为水泥用的C × 3%，即一般9㎏/m 3。

(2) cement mortar precausions engineering water-proofing agent for dosage of cement admixture of C × 3%, . general 9㎏/ m 3.

2、用法：机械搅拌混凝土、砂浆作：首先确定防水剂用（防水剂未经稀释前不得直接加入搅拌机内使用），然后将防水剂按比例加入搅拌机内、不足水用自来水补充，搅拌2～3分钟，使混凝土（砂浆）达到均匀，和易性为宜。

2, usage: mechanical mixing concrete, mortar homework: first determine water-proofing agent usage (water-proofing agent without dilute the former does not directly add to the mixer used), then water-proofing agent in proportion to join the mixer, insufficient water with the tap water supplement, stir 2～3 minutes, make concrete (mortar) reach even, workability advisable.

3、人工拌合水泥砂浆作：先将防水剂直接拌和使用，施工层必须牢固、平整、干净。砂浆抹面分两次作厚度20㎜

3, artificial white cement mortar assignment: first the water-proofing agent directly mixing use, construction must be firm, smooth, grass-roots clean. Mortar precausions points two assignments thickness 20㎜

4、本防水剂适应普通硅盐水泥和硅盐水泥，标号不低于32.5Mpa。

4, this water-proofing agent adapt to ordinary Portland cement and Portland cement, label, not less than 32.5Mpa.

七、防水剂与柔性防水剂材料对照

Seven, water-proofing agent with the flexible water-proofing agent materials control

1、工程造价

1, engineering cost

柔性防水材料	名称	防水部位	厚度	材料费/㎡	人工费/㎡	合计费用
	SBS	地下室内、外墙面、地面、厨房、卫生间	2+2	10－18元	5元	15－23元
	无纺布与改性沥青膏	同上	一布 两涂	20元	3元	23元
	聚脂	同上	1㎜	31元	7.5元	38.5元
	沥青油毡	同上	一毡一油	8元	3元	11元
	沥青油毡	同上	一毡二油	11元	3元	14元
BT-2000型防水剂		同上	防水砂浆20㎜	4元		4元

※防水剂工程造价仅为SBS总造价的20 - 17%，聚脂总造价的10%。

Later water-proofing agent project cost is only SBS total cost 20-17%, polyurethane 10% of the total cost.

2、施工方法（防水部位同上）

2, construction method (waterproof parts alexandrine)

柔性防水剂材料	BT-2000型防水剂
先做水泥砂浆抹面，再做防水。	按水泥掺3%做水泥砂浆抹面，性完成防水工程。

※防水剂能完成防水砂浆抹面工程，比柔性防水工艺简单、省工时，节省人工费。

Later water-proofing agent can a complete waterproof mortar precausions engineering, flexible waterproofing than simple process, province hours, save Labour .

八、贮运及包装：

Eight, shipping and packing:

1、塑料桶包装，20kg /塑料桶；宜在室内阴凉、干燥、通风处保存，严禁在零度以下环境中存放

2、贮存期：3年

1, packed in plastic drum, 20kg/plastic drum, Appropriate indoors in cool, dry and ventilated place preservation, no below zero deit in the environment.

2, the storage period: three years