Telaire Airestat T5000 系列 室内型二氧化碳变送器 The 5000 Series Airestat CO2 是一种壁装式,用来测控二氧化碳浓度 的变送器。双色发光二极管 ( 以红、黄、绿三色 ) 来显示二氧化碳浓 度。输出兼容模拟信号 (0-10V) 与数字信号 (RS232/TTL) ,提供被动 温度输出。 产品特点 : Telaire Model No CO 2 Temp LED GE Logo T5001 √ √ T5003 √ √ √ T5005 √ √ √ T5007 √ √ √ √ 产品详述 : 取样方法 : 红外线试验法 (NDIR), 镀金光学 , (with Telaire ’ s patented ABC Logic self calibration algorithm). 漫射取样 . 测量范围 : 0-2,000 ppm 工厂校准 . Output scalable using UIP up to 3,000 ppm with resulting decrease in sensor accuracy **性 : +/- 100 ppm @22 ° C (72 ° F) when compared with a factory reference. 温度依存性: 0.2% FS per ° C 稳定性 : < 2% of FS over life of sensor (15 years typical) 非线性 : < 1% of FS 压力依存性 : 0.13% of reading per mm Hg 校准间隔 : Not required * 响应时间 : TBD, pending verification tests. Estimated at 3-5 minutes for 90% step change. 启动时间 : < 2 minutes (operational) 10 minutes (maximum accuracy) 操作条件 : 0 to 50 ° C (32 to 122 ° F) 0 to 95% RH, non condensing 贮藏条件 : -20 to 70 ° C (-4 to 158 ° F) 0 to 95% RH, non condensing 温度 NTC 20k Thermistor 输出 Analog: 0-10V (100 Ohms output impedance) Digital: RS-232 (TTL Level) communication with Telaire UIP software. 连接 : Screw terminals for 18 – 28 AWG. 电源要求 : 18 - 30 VAC RMS, 50/60Hz or 18 - 42 VDC, polarity protected 功率 : 1.75 VA average, 3.25 VA peak AGENCY/CERTIFICATIONS: FCC Part 15 Class B, CE, ROHS, WEEE 保修期 : 24 个月 * 注意 : 自动校准背景,即 ABC Logic ,是一种利的自 动校准技术。应用范围:在一个 14 日的周期中浓 度至少有三次下降到外部环境条件(大约 400 ppm ) - 特别是无操作的状态下。经两周的操作可 达到完全。 |
|