| 项目ltem | 特性Performance Characteristics |
| 使用温度范围Operating Temperature Range | -40to+105℃ | -25to+105℃ |
| 额定电压范围Rated Voltage Range | 6.3to100VDC | 160to450VDC |
| 电容范围Capacitance Range | 0.1to4700μF | 0.47to220μF |
| 电容允差Capacitance Tolerance | +20%（100Hz or 120Hz，+20℃） |
| 漏电流Leakage Current（+20℃，大max） | I≤0.03CV或4（μA）额定工作电压充电3分钟后读数，取大者 I≤0.01CV or 3(μA)After3minutes,whichever is greater measured with rated working voltage applied | I≤0.03CV+10（μA）额定工作电压充电3分钟后读数，取大者 I≤0.03CV+10(μA)After3minutes,whichever is greater measured with rated working voltage applied |
| 损耗角正切值Dissipation Factor（tgδ） | | 工作电压WorkingVoltabe(VDC) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 | 160 | 200 | 250 | 350 | 400 | 450 | | (%)大 | 28 | 24 | 20 | 16 | 14 | 12 | 10 | 10 | 20 | 20 | 20 | 25 | 25 | 25 |
容>1000μF时 ，每增加1000μF 值增加2%( 100Hz or 120Hz，+20℃)For capacitance1000μF,Add 2%per another 1000μF (100Hz or 120Hz，+20℃) |
| 低温特性Low TemperatureCharacteristics（120Hz） | 阻抗比，大 max Impedance ratio at 120HZ to the 20℃ value| 工作电压Working Voltage(VDC) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 | 160 | 200 | 250 | 350 | 400 | 450 | | (%)大 | 28 | 24 | 20 | 16 | 14 | 12 | 10 | 10 | 20 | 20 | 20 | 25 | 25 | 25 |
|
| 高温负荷寿命Load Life | After 1,000 hours application of rated voltage at 105℃,capacitors meet the characteristics |
| Meet the characteristics requirements mentioned below |
| 环境温度:+105℃ | Ambient timperature: +105℃ |
| 施加电压:额定工作电压(VDC) | Applied voltage: Rated Working Voltage(DVC) |
| 试验后要求:室温下恢复16小时,+20℃测试 | After test requirements: Resumde 16 hours atnormal temperature |
| 电容变化:≤25%规定值 | Capacitance change:≤25% of the initial measured value |
| 损耗角正切值:≤200%初始值 | Dissipation Factor:≤200% of the initial specified value |
| 漏电流:≤规定值 | Leakage Current:≤The initial specified value |
| 高温无负荷寿命Shelt Life | 试验条件 | Test conditions |
| 持续时间:500小时 | Duration time: 500hours |
| 环境温度:+105℃ | Ambient temperature:+105℃ |
| 施加电压:无 | Applied voltage: None |
| 试验后要求:室温下恢复16小时,+20℃测试 | After test requirements: Resumed 16 hours atnormal timperature |
| 电容变化:≤25%规定值 | Capacitance change:≤25% of the initial measured value |
| 损耗角正切值:≤200%初始值 | Dissipation Factor:≤200% of the initial specified value |
| 漏电流:≤200%规定值 | Leakage Current:≤200% of the initial specified value |