| 外观 | 细腻均匀有光泽 | 密度 | 0.95 | | 拉伸强度 | 0.5 | 伸长率 | 220 | | 贮存期 | 7个月 | 产地 | 深圳 | | | 美氏 | 固化条件 | 常温 | | 固化时间 | 0.2 | 耐水性 | 有 |
"美氏M6361"性硅密封胶是一种性固化的高性能密封胶:1)固化迅速;2)固化收缩率低;3)在低温(-45℃)至高温(+164℃)内保持良好弹性;4)柔软抗震,耐变形;5)对于多数材有良好的兼容性;6)用于各类门窗安装.说明:1)施工温度在5°C~40°C之间;2)用两块布法清洁材;3)将胶嘴按需要的大小做45°切断;4)将胶打满接缝处;5)10分钟内结皮. 重要:1)使用前请做材料相容性测试;2)不用于铜,锌和砖石材料;3)不用于幕墙结构性装配或表面温度(45℃)以上的材料;4)不用于渗出油污或溶剂的材料；5)在足够通风条件下使用.注意:远离儿童!避免接触眼睛和皮肤!如有接触,请用水冲洗;仍然不适的请医检查.执行标准: GB/T14683-2003.保期: 7个月(<24℃)
"MEISHI M6361" acidity silicone sealant is a acidic curing high performance grade silicone sealant:1)Rapid solidification;2)Low shrinkage on curing;3)Keep elastic in low(-45℃) and high(+164℃) temperatures;4)High grade soft,be able to bear oscillation;5)Good adhesion to many substrates;6)Applicable to the assembly of various doors and :1)Construction applicable between 5℃~40℃;2)Substrates should be solvent cleaned using two clothes method;3)Cut the nozzle to desired opening at 45°angle ;4)Fill the joint completely;5)Formation of skin in 8 :1)Please do material compatibility testing before use；2)Not for copper,zinc and stone;3)Do not use in structural applications or where surface temperatures exceed 45℃ for material safety;4)Incompatible oozing out oily or solvents;5)Apply in Plenty of air.PRECAUTIONS:Keep out of the reach of children!Avoid contact with eyes and skin!In case of contact,flush with lot water;If still indised,consult a doctor.11.3
|
|