信息传送内容 | 数据 | 频段 | 2400-2484(MHz) | 型号 | SZ12-01 | 息模式 | 都可以 | 支持网络 | 星型网,点对点 | | shuncom | 外行尺寸 | 48*34*10(mm) | 发射功率 | 0.5(W) |
WIFI Module Product introduction Shuncom WIFI module is a wireless device by UART to IP or IP to UART for data traner. It transmits data by WIFI network. It integrates industrial embedded processor and TCP/IP protocol for the transparent data transmission. Fast and reliable liking makes the device online, the supports of multiple protocols make a fully solutions for a variety of applications.
front view back view Size: 48mmX34mmX10mm(length*width*height) Pin connection: Pin | Description | VCC | The cathode of power, +5V | GND | System Ground | RX1 | UART receive (TTL) | TX1 | UART Transmit (TTL) | RX2 | RS232 or RS485 receive | TX2 | RS232 or RS485 transmit | C485 | RS485 control | CFG | Configuration | RST | Reset | PGD、PGC | this port for program debugging | RUN | RUN light flashes in 1 seconds when operating normally | NET | NET light is on when on network, off means not on network. | IO1、IO2、IO3、IO4、IO5 | IO1、IO2、IO3、IO4、IO5 can realize 5 way PWM output (reserved ports, now can’t realize) | AD1、AD2、AD3、AD4 | AD1、AD2、AD3、AD4 can realize 4 way 10 bit AD Sampling (reserved ports, now can’t realize) | ALM、SLP、IO7、IO8 | ALM、SLP、IO7、IO8 is IO port, can realize the normal IO input and output. (reserved ports, now can’t realize) |
Interface: 1. Double pins interface 2. Baud rate:1200—115200bps 3. power supply:3.3V or 5V wireless: 1. Compatible IEEE standard 802.11b/g/n 2. IEEE standard 802.11 RF transceiver 3. Unique serialized Mac address 4. Date Rate:1 or 2 Mbps 5. Distance:up to 400M(1300 feet) 6. Working in ISM band 2.400–2.484GHz 7. Having 14 channels to choose 8. Support 802.1x and 802.1i safety:WEP、WPA-PSK and WPA2-PSK 9. Support two network: Infra and Adhoc 10. Small SMA antenna 11. America(FCC)、Canada(IC)、Europe(ETSI)and Japan(ARIB)Radio regulatory approvals 12. Pass Wi-Fi® certificatin Others: 1. Support multiple network protocols: TCP、UDP、DHCP、ICMP、DNS 2. Support UART transparent transmission 3. Support PC Configuration 4. Support simple AT+ control commands to configure Technical Parameters l 1. 2. a) 1 Name | Parameters | WIFI wireless module | Wireless network | Wireless standard | IEEE802.11b | Frequency range | 2.400–2.484 GHz | Receiver Sensitivity | The typical sensitivity is -91dBm when on 1Mbps | Data rate | 1 and 2 Mbps | Modulation | DSSS | Transmit Power | The typical transmit Power is +10 dBm (but we test it is +7dBm) | Hardware | Interface | UART(RS232/RS485/TTL) | Data rate | 1200~115200 bps | Power supply | 5V or 3.3V | Antenna | IPEXantenna | Receiving Current | 160mA | Transmitting current | 200mA(Peak current 250mA) | Standby current | 120mA | Wireless Certification | America(FCC)、Canada(IC)、Europe(ETSI)and Japan(ARIB)Radio regulatory approvals | Software | Network | Infra/Adhoc | Security Mechanisms | WEP/WPA-PSK/WPA2-PSK | Network protocol | TCP/UDP/ICMP/DHCP/DNS | URAT command | AT+ instruction set | Network protocol | TCP/ ICMP/DHCP/DNS | Working Environment | Operation Temperature | -20°C ~85°C | Storage Temperature | -40°C ~125°C |
Antenna This module has an IPX interface of antenna. WIFI module can used the following antennas which have passed the related certifications: Application 1. Public utilities and smart energy: Thermostats, smart meters 2. Consumer electronics: remote control, home security, toys, etc. 3. Industrial control: sensors, industrial safety, M2M communication 4. Remote device management: Location asset tracking, automotive 5. Retail, health care, IOT (Internet of things) industries Technical Support: Shanghai Shuncom Electronic Technology Co.,Ltd Add: 502 Room, 4 Building, No.289, Bisheng Road, Pudong New Area, Shanghai, China Tel: 021-33933988/78/68/58/28/18 Fax: 021-33933988-6800 Email: 6822@, 6835@ Http:
|