1、适用范围:五金、金属、玻璃、陶瓷、电镀、大理石等材料丝印移印2、特性:耐冲压、耐折弯、免烘烤自干、耐酒精、耐酸碱、耐汽油、耐腐蚀。3、技术参数:a.粘度:8000-12000CPS;b.细度:5UM↓、光泽:60°↑;c.干燥条件:自干24小时;d.铅笔硬度:2H↑;e.耐酒精:99%乙醇500g力来回超过30次;f.耐磨:500g力来回超过30次;g.过网性能:77T-145T网纱;4、稀释剂的选择:稀释剂:S-3;使用前添加10%-15%的DB-01固化剂效果更好。5、注意事项:a.不可与其它油墨混用;b.使用S-3慢干稀释剂稀释;c.加过固化剂的油墨必须在3小时内用完;d.密封保存,远离火源。6、应急处理措施:备注:由于材料及使用中的变数,可能是结果会有变化,以上数据仅供参考,使用前请自行测试。1, the scope of application: no halogen ink can be printed, ABS, PC, PS, acrylic, metal, electroplating, UV surface.2, acteristics: medium dry, ethanol, acid resistance.3, technical parameters:A. viscosity: 8000-12000CPS;B.: 5UM:: gloss, fineness of 60 degrees up;C. dry conditions: 24 hours from dry;D. pencil hardness: 2H up;E. resistance to alcohol: 99% ethanol 500g fce back fth me than 30 times;F. wear: 500g fce back fth me than 30 times;G. n e t perfmance: 77T-145T;4, thinner choice: thinner: S-3; befe using the 10%-15% to add DB-01 curing agent better effect.5, matters needing attention:A. other printing ink;B. using S-3 slow dry diluent dilution;C. plus the curing agent of the ink must be used up within 3 hours;D. sealed to save, away from the fire source.6, emergency treatment measures:A. such as dipped into the eye immediately clear water cleaning, serious medical treatment,B. fire fighting measures: dry powder, foam fire extinguisher s.] Note: due to the materials the use of variables, possibly is the change, the above data are f reference only, befe using please self testing. |
|